Penetración en la cámara pulpar del blanqueamiento dental con peróxido de carbamida a diferentes concentraciones / Penetration in the pulp chamber of dental whitening with carbamide peroxide to different concentrations / Penetração na câmara pulpar do clareamento dental com peróxido de carbamida a diferentes concentrações

Los agentes utilizados en blanqueamiento dental provocan una respuesta inflamatoria de la pulpa, que de-pende de la concentración y el tiempo de aplicación de la sustancia empleada. Objetivo: Evaluar el nivel de penetración del blanqueamiento a base de peróxido de carbamida a diferentes concentraciones: 10, 20 y 35% dentro de la cámara pulpar. Materiales y métodos: Se utilizaron 120 terceros molares humanos extraí-dos, divididos aleatoriamente en cuatro grupos (n=30): grupo A: control; grupo B: 10% gel de Peróxido de Carbamida (CP del inglés Carbamide Peroxide); grupo C: 20% gel CP y grupo D: 35% gel CP. Los dientes se cortaron 2 mm por debajo del límite amelocementario con una máquina de corte, se colocó buffer de acetato en la cámara pulpar y se aplicó por 40 minutos el agente clareador una sola vez. Los dientes se mantuvieron a temperatura ambiente (25°C) durante el proceso. La penetración de CP se estimó con cristal violeta y peroxi-dasa de rábano picante, en un espectrofotómetro de absorbancia. Los datos fueron analizados mediante las pruebas estadísticas ANOVA complementada con el Test post Hoc de Tukey con un grado de significancia al 5%. Resultados: Las medias obtenidas para el Grupo B fueron de 0,062 mg (±0,018), para el Grupo C fueron de 0,063 mg (±0,017), y para el Grupo D fueron de 0,086 mg (±0,024). Existiendo diferencia significativa (p= <0.05) del grupo D con relación a los otros grupos. Conclusión: la penetración de CP en la cavidad pulpar depende de la concentración, siendo mayor en concentración al 35%.

The elimination of calcium hydroxide in the root canal is decisive for the success of endodontic treatment, the remnants can interact negatively with endodontic sealants increasing filtrations and decreasing the quality of the seal. Objective: To evaluate the effect of intra-duct medication with calcium hydroxide paste on the pen-etration of the sealing cement inside the dentinal tubules. Materials and methods: 20 distal roots of upper molars were instrumented using the Wave One Large 40 / .08 System. They were randomly divided into two groups: one sealed with a single cone technique and Ah plus cement with rhodamine-B and another sealed with the same technique and Ah plus cement with rhodamine B, previous placement for 15 days and removal by recapping the paste calcium hydroxide. Subsequently, the teeth were cut transversely and photomicro-graphs of the cervical, middle and apical third were performed using the laser scanning confocal microscopy technique. The maximum depth of penetration was determined through the Image J program. Results: The Ah plus sealing cement had lower penetration values when the calcium hydroxide paste was previously used as an intra-channel medication (p <0.01). The third of the duct with the highest penetration was the cervical third followed by the middle third and finally the apical (p <0.01). Conclusion: Remaining calcium hydroxide decreases the penetration of the sealing cement Ah plus in the dentinal tubules in all thirds of the root canal.

Os agentes utilizados no clareamento dos dentes estimulam uma resposta inflamatória da polpa, o que de-pende da concentração e do tempo de aplicação da substância utilizada. Objetivo: Avaliar o nível de pe-netração do clareamento à base de peróxido de carbamida em diferentes concentrações: 10, 20 e 35% no interior da câmara pulpar. Materiais e métodos: foram utilizados 120 terceiros molares humanos extraídos, divididos aleatoriamente em quatro grupos (n = 30): grupo A: controle; grupo B: gel de peróxido de carbamida a 10% (CP do inglês carbamide peroxide); grupo C: gel CP de 20% e grupo D: gel CP de 35%. Os dentes foram cortados 2 mm abaixo do limite amelocementário com uma máquina de corte, tampão acetato foi colo-cado na câmara pulpar e o clareador foi aplicado por 40 minutos apenas uma vez. Os dentes foram mantidos à temperatura ambiente (25 °C) durante o processo. A penetração de CP foi estimada com cristal violeta e peroxidase de rábano picante, em espectrofotômetro de absorvância. Os dados foram analisados por meio dos testes estatísticos ANOVA, complementados com o teste post hoc de Tukey, com um grau de significância de 5%. Resultados: As médias obtidas no grupo B foram de 0,062 mg (± 0,018), no grupo C foram de 0,063 mg (± 0,017) e no grupo D foram de 0,086 mg (± 0,024). Existe uma diferença significativa (p = <0,05) do grupo D em relação aos demais grupos. Conclusão: a penetração da PC na cavidade pulpar depende da concentração, sendo maior na concentração em 35%.

Influencia de la medicación intracanal con pasta de hidróxido de calcio en la penetración del cemento obturador / obturadorInfluence of intracanal medication with calcium hydroxide paste in the penetration of the shutter cement / Influência da medicação intracanal com pasta de hidróxido de cálcio na infiltração do cimento obturador

La eliminación del hidróxido de calcio en el conducto radicular es determinante para el éxito del tratamiento endodóntico, los remanentes pueden interaccionar negativamente con los selladores endodónticos aumen-tando las filtraciones y disminuyendo la calidad de la obturación. Objetivo: Evaluar el efecto de la medicación intraconducto con pasta de hidróxido de calcio en la penetración del cemento obturador en el interior de los túbulos dentinarios. Materiales y métodos: 20 raíces distales de molares superiores se instrumentaron uti-lizando el Sistema Wave One Large 40/.08. Se dividieron aleatoriamente en dos grupos: uno obturado con técnica de cono único y cemento Ah plus con rodamina-B y otro obturado con la misma técnica y cemento Ah plus con rodamina B, previa colocación por 15 días y remoción mediante recapitulación de la pasta de hidróxido de calcio. Posteriormente los dientes fueron cortados transversalmente y se realizaron fotomicro-grafías del tercio cervical, medio y apical a través de la técnica de microscopia confocal de barrido por láser. La profundidad máxima de penetración fue determinada a través del programa Image J. Resultados: El ce-mento sellador Ah plus presentó menores valores de penetración cuando fue empleada previamente la pasta de hidróxido de calcio como medicación intracanal (p<0,01). El tercio del conducto con mayor penetración fue el tercio cervical seguido por el tercio medio y por último el apical (p<0,01). Conclusión: Los remanentes de hidróxido de calcio disminuyen la penetración del cemento sellador Ah plus en los túbulos dentinarios en todos los tercios del conducto radicular.

The elimination of calcium hydroxide in the root canal is decisive for the success of endodontic treatment, the remnants can interact negatively with endodontic sealants increasing filtrations and decreasing the quality of the seal. Objective: To evaluate the effect of intra-duct medication with calcium hydroxide paste on the pen-etration of the sealing cement inside the dentinal tubules. Materials and methods: 20 distal roots of upper molars were instrumented using the Wave One Large 40 / .08 System. They were randomly divided into two groups: one sealed with a single cone technique and Ah plus cement with rhodamine-B and another sealed with the same technique and Ah plus cement with rhodamine B, previous placement for 15 days and removal by recapping the paste calcium hydroxide. Subsequently, the teeth were cut transversely and photomicro-graphs of the cervical, middle and apical third were performed using the laser scanning confocal microscopy technique. The maximum depth of penetration was determined through the Image J program. Results: The Ah plus sealing cement had lower penetration values when the calcium hydroxide paste was previously used as an intra-channel medication (p <0.01). The third of the duct with the highest penetration was the cervical third followed by the middle third and finally the apical (p <0.01). Conclusion: Remaining calcium hydroxide decreases the penetration of the sealing cement Ah plus in the dentinal tubules in all thirds of the root canal.

A eliminação do hidróxido de cálcio do canal radicular é determinante para o sucesso do tratamento endo-dôntico; os remanescentes podem interagir negativamente com os cimentos endodônticos, aumentando as filtrações e diminuindo a qualidade do selamento. Objetivo: Avaliar o efeito da medicação intracanal com pasta de hidróxido de cálcio na penetração do cimento de selamento no interior dos túbulos dentinários. Materiais e métodos: 20 raízes distais de molares superiores foram instrumentadas usando o sistema Wave One Large 40 /.08. Eles foram divididos aleatoriamente em dois grupos: um selado com técnica de cone único mais cimento Ah plus com rodamina-B e outro selado com a mesma técnica e cimento Ah plus com rodami-na-B, prévia colocação por 15 dias e remoção recolocação da pasta hidróxido de cálcio. Posteriormente, os dentes foram cortados transversalmente e fotomicrografias do terço cervical, médio e apical foram realizadas pela técnica de microscopia confocal de varredura a laser. A profundidade máxima de penetração foi de-terminada pelo programa Image J. Resultados: O cimento selante Ah plus apresentou menores valores de infiltração quando a pasta de hidróxido de cálcio foi utilizada anteriormente como medicamento intracanal (p <0,01). O terço do conduto com maior penetração foi o terço cervical, seguido pelo terço médio e finalmente o apical (p <0,01). Conclusão: O hidróxido de cálcio restante diminui a penetração do cimento selante Ah plus nos túbulos dentinários em todos os terços do canal radicular.

Correlation of corneal basal nerve changes with type 2 diabetic renal microangiopathy based on confocal laser microscopy / 眼科新进展

Objective To investigate the relationship between corneal basal nerve change and type 2 diabetic retinopathy based on confocal laser microscopy.Methods Together 118 patients with type 2 diabetes (T2D) were collected in our hospital from February 2016 to February 2017,including 57 patients with diabetic retinopathy (DR group) and 61 patients without DR (NDR group).For comparison,60 healthy volunteers were selected as the control group.And all the subjects were examined by corneal confocal laser microscopy to analyze the relationship between the morphological parameters of the corneal nerve and clinical variables.Results Corneal nerve fiber density,corneal nerve branch density and corneal nerve branch length in DR group were (20.03 ±4.22) · mm-2,(22.01 ± 7.05) · mm-2 and (9.50 ± 1.76) mm ·mm-2,significantly less than those of the control group and NDR group (all P ＜ 0.05);and corneal nerve fiber curvature was (0.30 ± 0.03),significantly higher than that of the control group and NDR group (all P ＜ 0.05);In DR patients,phase Ⅲ patients had smaller the corneal nerve fiber density,corneal nerve branch density and corneal nerve branch length,but the larger corneal nerve fiber curvature than the phase Ⅰ and Ⅱ patients (all P ＜ 0.05);course of disease of DR group was (12.04 ± 2.48) years,which was significantly higher than that of NDR group (P ＜ 0.05),while fasting C peptide and fasting insulin were (1.41 ± 0.58) μg · L-1 and (20.05 ± 7.91) mU · L-1,respectively,significantly lower than those of NDR group (all P ＜ 0.05);The duration of T2D was negatively correlated with the corneal nerve branch density and corneal nerve branch length (r =-0.322,-0.317,all P ＜0.05);Fasting C peptide was positively correlated with the corneal nerve branch density (r =0.298,P ＜ 0.05),and negatively correlated with the corneal nerve curvature (r =-0.311,P ＜ 0.05).Conclusion Patients with T2D retinopathy have abnormal morphology of corneal nerve.And confocal laser scanning microscopy is conducive to the early detection of microvascular disease in T2D patients with a longer course of disease or a low level of fasting C peptide.

Effect of Resin Cement Porosity on Retention of Glass-Fiber Posts to Root Dentin: An Experimental and Finite Element Analysis

The aim of this study was to evaluate the effect of porosity of self-adhesive resin on the stress distribution, post retention and failure mode of fiber post cemented to human root dentin. Ten human central upper incisors with circular root canal were selected. They were sectioned with 15 mm and were endodontically filled. The roots were scanned using micro-CT after post space preparation for root filling remaining evaluation. Fiber posts were cemented using self-adhesive resin cement (Rely X U200, 3M-ESPE). Two 1-mm-thick slices from the cervical, medium and apical thirds were scanned for resin cement bubbles volume measurements and submitted to a push-out test (PBS). Three operators using stereomicroscopy and confocal laser microscopy classified the failure mode. Stress distributions during the push-out test were analyzed using 3D finite element analysis. PBS values (MPa) were submitted to one-way ANOVA and Tukey's post hoc tests and the failure modes using the Kappa coefficient to assess inter-operator agreement. Chi-square test was used to determine significant differences between the methods ( = 0.05). Push-out bond strength was significantly affected by the bubbles presence in all root depth (p<0.05). The stress concentration was higher when the bubbles were present. Adhesive dentin/resin cement interface failure was the most frequent type of failure. Confocal microscopy was better than stereomicroscopy for failure analysis. Bubbles generated during resin cement insertion into the root canal negatively affect the stress distribution and the bond strength. The use of confocal microscopy is recommended for failure analysis.

Resumo O objetivo deste estudo foi avaliar o efeito da integridade do cimento resinoso autoadesivo, expresso pela presença de bolhas, sobre a distribuição de tensão, resistência adesiva e modo de falha de pinos de fibra cimentados à dentina radicular humana. Dez incisivos centrais superiores humanos com canais radiculares circulares foram selecionados. Os mesmos foram seccionados com 15 mm e tratados endodonticamente. As raízes foram digitalizadas utilizando micro-CT após preparo do pino para avaliação de remanescentes de material obturador. Pinos de fibra foram cimentados utilizando cimento autoadesivo (Rely X U200, 3M-ESPE). Duas fatias de 1 mm de espessura dos terços cervical, médio e apical foram escaneados para mensuração do volume de bolhas no cimento resinoso e submetidos ao teste de push-out. Três operadores classificaram o modo de falha utilizando microscopia confocal à laser e lupa estereoscópica. Distribuição de tensão foi analisada pelo método de elementos finitos 3D. Os valores de resistência adesiva (MPa) foram submetidos ao teste ANOVA em fator único seguido do teste de Tukey. Foi utilizado o coeficiente de Kappa para avaliar a concordância entre operadores. O teste Qui-quadrado foi utilizado para determinar diferenças significativas entre os métodos (α=0,05). A resistência adesiva foi significativamente afetada pela presença de bolhas independentemente da profundidade radicular (p<0,05). A concentração de tensão foi maior na presença de bolhas. Maior frequência de falha adesiva ocorreu na interface cimento/dentina. A microscopia confocal foi melhor do que estereomicroscopia para análise de falhas. A presença de bolhas afetou negativamente a distribuição de tensão e a resistência de união. Recomenda-se uso de microscopia confocal para análise de falhas.

Filling Effectiveness and Dentinal Penetration of Endodontic Sealers: A Stereo and Confocal Laser Scanning Microscopy Study

Abstract: The aim of this study was to evaluate the filling effectiveness and dentinal penetration of the sealers AH Plus, Pulp Canal Sealer EWT, Sealapex and MTA Fillapex applied according to the vertical condensation technique using thermoplastic gutta-percha. Forty single-rooted teeth were selected. After chemical-mechanical preparation and root-canal filling, sections of the root (2, 4 and 6 mm from the apex) were obtained and analyzed by stereo microscopy and confocal laser scanning microscopy. Data were tabulated and statistically analyzed. With regard to the assessment of void spaces in the filling material at 2 mm from the apex, the sealers showed similar results, but at 4 and 6 mm from the apex, MTA Fillapex had inferior performance compared to AH Plus (at 4 mm), Pulp Canal Sealer EWT (at 4 and 6 mm) and Sealapex (at 6 mm) (p<0.05). With regard to the penetration into dentinal tubules at 2 mm from the apex, the sealers also showed similar results, but at 4 and 6 mm Pulp Canal Sealer EWT had an inferior performance compared to MTA Fillapex and AH Plus, respectively (p<0.05). All four sealers were found to be similar regarding adaptation of the filling material to the root canal walls, except the MTA Fillapex, which showed failures at 4 and 6 mm from the root apex. With regard to the ability to penetrate into the dentinal tubules, the sealers were found to be equivalent, except for the Pulp Canal Sealer EWT as it had poorer results at 4 and 6 mm compared to MTA Fillapex and AH Plus, respectively.

Resumo: O objetivo deste estudo foi avaliar a efetividade da obturação e capacidade de penetração no interior dos túbulos dentinários dos cimentos: AH Plus, Pulp Canal Sealer EWT, Sealapex e MTA Fillapex, associado à técnica de obturação da condensação vertical da guta-percha termoplastificada. Selecionou-se 40 dentes unirradiculados. Após o preparo químico-mecânico e obturação, secções das raízes (a 2, 4 e 6 mm do ápice) foram obtidas e analisadas através de microscopia estéreo e confocal de varredura a laser. Os dados foram tabulados e analisados estatisticamente. Em relação à avaliação de espaços vazios na obturação a 2 mm, os cimentos apresentaram resultados similares, entretanto a 4 e 6 mm MTA Fillapex apresentou desempenho inferior em relação a AH Plus (a 4 mm), Pulp Canal Sealer EWT (a 4 e 6 mm) e Sealapex (a 6 mm) (p<0,05). Em relação à capacidade de penetração nos túbulos dentinários a 2 mm, os cimentos apresentaram resultados similares, contudo a 4 e 6 mm, o Pulp Canal Sealer EWT mostrou-se inferior ao MTA Fillapex e AH Plus, respectivamente (p<0,05). Os quatro cimentos foram similares em relação à adaptação da obturação nas paredes dos canais radiculares, exceto o MTA Fillapex, que evidenciou falhas a 4 e 6 mm. Na capacidade de penetração nos túbulos dentinários, os cimentos foram equivalentes, exceto o Pulp Canal Sealer EW que se mostrou inferior a 4 e 6 mm, quando comparado com MTA Fillapex e AH Plus, respectivamente.

Efeitos do suco de laranja e da molhabilidade da cerâmica sobre a formação do in situ / The effects of orange juice and ceramic wettability on in situ biofi lm formation

Este estudo procurou determinar os parâmetros do biofilme formado in situ, em cerâmica de revestimento, de acordo com a disponibilidade de carboidrato (suco de laranja) e a molhabilidade da superfície cerâmica. Discos de duas cerâmicas foram feitos (Vita VM7 e VM13, Vita Zahnfabrik, Bad Sackingen, Alemanha). Quatro discos foram aderidos a dispositivos palatais usados por oito voluntários. Colocou-se três gotas da água destilada (pH=6) ou suco de laranja (pH=3,5) sobre os discos oito vezes/dia. Após 48 horas in situ, os dois discos mais palatais foram removidos do dispositivo e analisados com microscopia confocal de varredura a laser (MCVL) para caracterização do biofilme (espessura média, μm e biovolume, μm3/μm2). O ângulo de contato (°) foi medido nas superfícies polidas de espécimes controle, e após 15 dias de uso nos espécimes da região frontal do dispositivo palatal. Os dados foram submetidos à estatística descritiva e inferencial (Mann-Whitney e teste t, p < 0,05). A molhabilidade de ambas as cerâmicas não diferiu estatisticamente. A formação do biofilme sobre as cerâmicas de revestimento não foi influenciada pelo suco de laranja ou pela molhabilidade da cerâmica...

This study aimed to determine the in situ biofilm parameters on veneering ceramics, according to the carbohydrate (orange juice) availability and the ceramic surface wettability. Disks were made out of two veneering ceramics (Vita VM7 and VM13, Vita Zahnfabrik, Bad Sackingen, Alemanha). Four disks were bonded to palatal devices worn by eight volunteers. The subjects dripped three drops of distilled water (pH=6) or orange juice (pH=3.5) on the disks 8x/day. After 48 h in situ, the two palatal disks were removed from the device and analyzed by Confocal Laser Scanning Microscopy (CLSM) for biofilm characterization (mean thickness, μm and biovolume, μm3/ μm2). The contact angle (°) was measured on the polished surfaces of as sintered specimens and after 15 day of in situ usage, on the frontal disks of the palatal device. The data were subjected to descriptive and inferential (Mann-Whitney and paired-t test, at p < 0.05) statistics. The biofi lm parameters of VM13 were not measurable, whereas the VM7 biofilm parameters were not signifi cantly affected by the type of liquid. The wettability of both ceramics also did not differ statistically. The biofi lm formation on the veneering ceramics was neither influenced by the orange juice dripping nor the ceramics’ wettability...

Morphology of normal bulbar conjunctiva under in vivo confocal microscopy / 中华实验眼科杂志

Background Application of confocal microscopy in the investigation of ocular surface system in living eye have been greatly extended in two decades.In vivo confocal microscopy allows the evaluation of the normal or pathological tissue at the cellular level.However,seldom study about the morphology of normal in vivo human bulbar conjunetiva under the confocal microscopy was induced. Objective Present study was to analyze the appearance of normal bulbar conjunetiva cells under the in vivo confocal microscopy. Methods Laser scanning confocal microscopy was used to examine the morphological characteristics of the bulbar conjunetiva in 21 eyes of 15 healthy volunteers.The parameters of confocal microscopy were as follows:resolution 1 μm,wave length 670 nm,field range 400 μm×400 μm.The epithelial cell numbers,dendritics cells density and goblet cells density from superior,inferonasal,nasal and temporal bulbar conjunctiva were calculated respectively and compared and imaged by the HRT3 Rostock Cornea Modual. Results The superficial epithelial cells of the bulbar conjunctiva was seen with the small cell nuclei and blur border.The borders of basal epithelial celt were clearly visible without cell nuclei.The presumed goblet cell presented with a large hyperreflective oval-shaped cell with relatively homogeneous brightness,crowed in groups or mainly dispersed.The orfices at the epithelial surface represented the goblet cells,showing some open and expel contents.The dendritic cell appeared to be hyperreflective corpuscular particles with visible processes among conjunetival epithelial cells.A few dense white fiber meshwork was exhibited in conjunctival stroma with the traverse blood vessels containing cellular elements.The superficial and basal epithelial cell densities were 2556±692and 2985±376 cells/mm2 respectively,and overall goblet and mature dendritic cells densities were 77±39 and 26±35 cells/mm2 respectively.Significant differences were proved in globet cell density and dendritic density among different conjunetival zones(P=0.001,P=0. 000),however,the alteration of conjunetival epithelium cells was insignificant in different area(P=0.204,P=0.130).Conclusion Confocal microscopy is a useful tool for the study of morphology of human bulbar conjunctiva cells in vivo.which offer a valuable aid in the diagnosis of ocular surface disease.

A novel femur window chamber for in vivo studies of bone microcirculation

Background: Due to technical difficulties of in vivo observation of blood flow and microvessels in bone, no study has been done concerning the role of blood flow in bone remodeling. Objective: To develop a new window chamber for microscopic observation of the microcirculation in living bone, and to examine the utility of the chamber using rat femur in health and diseases. Methods: A stainless chamber (19 mm in diameter and 5 mm in height) with a circular window (7.5 mm in diameter) for microscopic observation was developed. The chamber was put on rat femur which was exposed for direct observation of the microvasculature. Intravital observation was made of bone blood flow and microvessels, using fluorescence videomicroscopy and confocal laser microscopy. The utility of the chamber was examined based on images of microcirculation (normal and abnormal) in the femur bone. Results and conclusions: Images of rat femur microvasculature were enhanced in the quality by use of the femur window chamber. The new chamber provides a powerful tool for in vivo studies of the bone microcirculation in health and diseases.

The three-dimensional structure of vascular smooth muscle cells: a confocal laser microscopic study of rabbit mesenteric arterioles.

Background: Information of the three dimensional (3D) structure of vascular smooth muscle cells (VSMCs) is essential for understanding the regulatory mechanism of blood flow in the microvascular system. objective: To examine the 3D structure of individual VSMCs in rabbit mesenteric arterioles, using confocal laser scanning microscopy. Methods: Japanese white rabbits were anesthetized with urethane and α-chlorase. After intravital observation of the mesenteric microcirculation under a videomicroscope, the intestine with mesentery was extracted and perfused and fixed with paraformaldehyde under a static pressure (100 mmHg). A section of the mesentery was isolated from the intestine and spread out to simulate the in vivo geometry of the the vascular network. The mesenteric section was stained with fluorescein anti-smooth muscle myosin antibody and rhodamine-labeled anti-rabbit Ig antibody. The samples were observed using confocal laser microscopy, and the 3D images were reconstructed by means of sliced images. The cross-sectional image was re-sliced to measure two axes of the best-fitting ellipse. Single VSMCs were picked out from the vascular wall using the continuity law of density distribution of vessel wall. Results: The cross-sectional shapes of arterioles were not circular but elliptical. The aspect ratio (major to minor axis) of the best-fitting ellipse was in the range from 0.3 to 0.7 for 28 arterioles (diameters: 10-30 μm). On the 3D image of VSMCs, the cell width ranged from 2.2 to 4.5 μm. The cells were classified into round and spindle types. The cell width of round shape was significantly larger than that of spindle shape. The VSMCs appeared to arrange circumferentially and tightly along the cross-section along the axis of vessel. The mean length of single VSMCs was approximately 1.2 times of the circumferential length of the arteriole. This cellular arrangement may have influence on the distribution of mechanical stress by VSMC-induced myogenic force. Conclusion: Confocal laser microscopy is useful for quantitative analysis of the 3D arrangement of individual VSHCs.

Synchronizing presentation of cyclins and merlin in single cell in vestibular Schwannoma tissues with confocal laser microscopy / 上海第二医科大学学报

Objective To explore the expression of merlin and cyclins and the nucleocytoplasmic shuttling of merlin in abiogenous vestibular schwannoma tissues. Methods Four paraffin imbedding vestibular Schwannoma samples were included in the study.The cyclins and merlin were analyzed by immunofluorescence at the same time,and the expression and location were synchronously observed with confocal laser microscopy(CLM) in a single schwannoma cell. Results Cyclins and merlin were perspicuously and synchronously presented in a single cell in vestibular schwannoma tissues.In early G1 phase of the tumor cell,merlin was mainly stained in the nucleus,followed by perinucleus and cytoplasm.In G1/S phase,merlin was concentrated in the perinucleus,less in the nucleus and cytoplasm.Merlin staining showed uniform distribution in the nucleus in G2/M phase,while was absent from the nucleus and concentrated in the perinucleus in late G2/M phase. Conclusion The expression of merlin and various kinds of cyclins can be synchronously presented in abiogenous vestibular schwannoma cells with immunofluorescence and CLM.Merlin is shuttling among the nucleus,cytoplasm and perinucleus along with the progression of cell cycle.

The Effects of Radiofrequency Energy on Human Articular Cartilage: The Effect of Power Setting and Mode of Treatment on Chondrocyte Viability / 대한정형외과학회잡지

PURPOSE: The objective of this study was to investigate the effects of radiofrequency energy on human chondrocyte viability, and to correlate confocal laser microscopy fluorescence to sulfate uptake and to the histological integrity of articular cartilage. MATERIALS AND METHODS: The chondroplasty procedure for chondromalacic articular cartilage was performed using a 3.0-mm ArthroWand (Arthroscopic Electrosurgery System, ArthroCare Corporation) on fresh human articular cartilage. Radiofrequency energy was applied to the cartilage surface through the probe at a velocity of 10-mm per second in contact and non-contact mode. Three power settings were used. The treated cartilage was analyzed for chondrocyte viability by confocal laser microscopy and (35)S uptake. RESULTS: Confocal laser microscopy demonstrated partial-thickness chondrocyte death irrespective of treatment method. No mode of treatment or radiofrequency energy power setting resulted in full-thickness chondrocyte death. The depth of cartilage ablation was increased in the treated areas in contact mode in proportion to the power level and the time of treatment. No statistically significant difference in radiolabeled sulfate uptake of the specimens was observed with respect to the treatment modes and power settings. CONCLUSION: The extent of chondrocyte death by radiofrequency energy was not as significant as reported previously when the probe was moved at the speed of 10 mm/sec. Radiofrequency energy may be useful to treat chondromalacic cartilage in a contact mode using a proper energy level and delivery time.